Printronix Network Interface Card, Руководство пользователя

Страница: 324 / 378

Chapter 15
Complete Command List
324
set ifc
Example: set ifc <ifnum> up|down
Set state of the specified network physical interface up or
down. <ifnum> is the interface number for the NIC device.
set logpath <logpath> name <new_name>
Example:
set logpath l1 name pagecount
Change the current name of the logpath (<logpath>) to a new
name as indicated by <new_name>. These names are case
sensitive.
set logpath <logpath > type [[-]job] [[-]user]
[[-]cksum] [[-]printer] [[-]ioport]
Example:
set logpath l2 type job user printer pgcnt
Establish the type of printer and print job logging to be done
within this <logpath>. The options are:
job Job ID, username, etc.
user User ID along with three messages per job
about start and finish.
cksum 16-bit checksum value to confirm integrity of
data printed.
printer For special printer feedback.
ioport Printer error messages determined through
the parallel port pins.
set logpath <logpath> port <TCP- port> |email|syslog
Example:
set logpath l3 port 2000
Determine where the log information should be sent for a print
job or attached printer. The choices are:
TCP-port TCP port number ranging from 1024 to
65000.
email Particular user's email address. This address
is set using the
set sysinfo email
emailname@IPaddress
or
emailname@domain.com
command.