Printronix Network Interface Card, Руководство пользователя

Страница: 190 / 378

Chapter 7
Novell Host Configuration (10/100Base-T)
190
7. Repeat steps 4 through 6 for each additional printer you would
like to have serviced.
8. Click SUBMIT when done and physically repower the printer to
make the new settings take effect.
Manual (Telnet) Method
1. Load a PSERVER on your Netware 3.
x
, Netware 4.
x
, or
Netware 5. x file server (i.e., issue a
load pserver
pservername
command on the file server).
NOTE: If it is an NDS PSERVER on a Netware 4. x /5. x file server,
you must specify the pserver name and context for
pservername
. For example:
load pserver .sales_ps.sales.printronix
2.
Telnet
to the print server:
telnet ipaddress
NOTE: If prompted for a User ID and password, type in
root
for
the ID and press ENTER at the password prompt (since
there is no password by default).
3. You should see a prompt with the NIC’s IP address:
ipaddress :root>
4. At the prompt,
store
the RPRINTER settings on the NIC. The
pservername
refers to the existing PSERVER.NLM on the file
server created in step 1.
Syntax:
store rprinter add pservername printernumber
NICdestination
An example of an RPRINTER servicing printer
0
of the
PSERVER.NLM called
pserver1
and sending jobs to the NIC
destination
d1prn
is:
store rprinter add pserver1 0 d1prn
NOTE: If it is an NDS pserver, enter only the PSERVER name and
not the context (e.g.,
sales_ps
).
5. Physically repower the printer to make the new settings take
effect.