Primes BeamMonitor BM+ 100S, Оригинальное руководство пользователя

Страница: 51 / 68

BeamMonitor BM+
35,0(6
51 Revision 02 EN - 02/2022
9.6.2 Advanced settings
1. Click on the Advanced tab.
2. Edit the options according to the ex-
planations in Tab. 9.6 on page 51.
Option Explanation
Save device settings All options marked with an asterisk in the Device control menu can be
saved in the EEPROM of the device.
These and other options for saving / loading configurations are de-
scribed in chapter 9.3.5 „Saving options“ on page 30.
Rotational speed in rpm *
For the BeamMonitor BM+, the rotation speed of the measuring tip is
always 1 562 rpm.
Calibrated wavelength(s) in nm * The “calibrated wavelength” is the wavelength at which the device has
been validated. This is stored in the device and is displayed in the LDS.
Used wavelength in nm * To calculate the beam quality factor M², the used wavelength must
be entered. Depending on the display in the option Calibrated
wavelength(s) in nm, the used wavelength can be entered in a defined
range.
For example, with a „calibrated wavelength“ of 1 064 nm, the used
wavelength can be entered from 1 000 - 1 100 nm.
Use one of the following options to set the wavelength of the laser used:
X Enter a value in the input field.
X Use the slider below the input field.
Move axes With this option you can move to a defined y-position.
Use one of the following options:
X
Enter a value in the input field.
X
Use the slider below the input field.
This option is described in chapter 9.3.4 „Move axes“ on page 29.
Tab. 9.6: Options in the Device control > Advanced tab of the Linescan measuring mode