Primes BeamMonitor BM+ 100S, Оригинальное руководство пользователя

Страница: 30 / 68

BeamMonitor BM+
35,0(6
30 Revision 02 EN - 02/2022
9.3.5 Saving options
The LDS offers (up to) three different options for saving. They differ by the storage location and the selection
of the data to be saved.
When saving / loading a configuration, note that the command is called in a certain measurement mode, but
the saved / loaded data set also includes the settings of the other measurement modes.
Saving data with an asterisk (*) on the
PC:
All data marked with an asterisk in the
Device control menu can be saved to a
preset file with the extension .pre on the
PC.
X To save a configuration, click on the
icon .
X To load a configuration click on the
icon .
Save data with an asterisk (*) in the
EEPROM of the device:
All options marked with an asterisk in the
Device control
menu can be saved in the
EEPROM in the device.
In this case, the settings will be retained
even if the device is switched off or dis-
connected from the power supply.
1. Click on the
Advanced
tab.
2. Click on the
Save device settings
button.
Save all settings in the LDS:
With these buttons you can save or load
all settings of the Device control menu.
The storage is made device-related in the
local installation of the LDS.
1. Click on the Settings tab.
2. Use one of the following options:
X Click the Save current parameters
button to save the settings of the
connected device.
X Click on the Load last parameters
button to load the last saved settings.