Primes BeamMonitor BM+ 100S, Оригинальное руководство пользователя

Страница: 47 / 68

BeamMonitor BM+
35,0(6
47 Revision 02 EN - 02/2022
9.5.5 Start measurement
DANGER
Serious eye or skin injury due to laser radiation
If you use a continuous plane measurement in the Monitor measurement mode to align the de-
vice, note the following:
X
Preferably align the device with a pilot laser where no dangerous reflections can occur.
X
If the device is aligned with a laser class 4, dangerous reflections may occur. In this case, the align-
ment must be performed remotely behind a separating protective equipment. The protective equip-
ment must block the radiation or attenuate it to a non-hazardous level.
1. Follow the warning messages in
chapter 9.1 on page 22.
2. Click the
Start
button.

The measurement begins.
Optional:
X
Click the
Stop
button to abort the
measurement.
X
Click the
Stop Rotation
button to
stop the rotation of the measuring tip.
Data is continuously read out from the
previously set measurement window
and displayed in the false color view.
3. Switch off the laser after the measure-
ment is completed, unless you want
to perform further measurements.