Primes BeamMonitor BM+ 100S, Оригинальное руководство пользователя

Страница: 45 / 68

BeamMonitor BM+
35,0(6
45 Revision 02 EN - 02/2022
9.5.3 Search laser beam automatically with the find beam function
1. Follow the warning messages in
chapter 9.1 on page 22.
2. Switch on the laser.
3. Click on the Settings tab.
4. Click on the Find beam button.
 The laser beam is automatically
searched for in the entire measuring
range. The measuring window and
gain are set automatically.
If the search is successful, the laser
beam is displayed in the graphic
representation.
If the beam is not displayed:
X Check again the correct alignment of
the device on the x-y plane according
to chapter 7.2.3 on page 15.
X Check the direction of the beam
entrance.
X Adjust the gain.
X Choose a different z-position.
X Increase the laser power (step by
step).
5. If necessary, adjust the measuring
window manually according to 9.5.4
on page 46.
6. Start the measurement according to
chapter 9.5.5 on page 47.