Primes BeamMonitor BM+ 100S, Оригинальное руководство пользователя

Страница: 29 / 68

BeamMonitor BM+
35,0(6
29 Revision 02 EN - 02/2022
9.3.4 Move axes
Within all measuring modes, the mea-
suring tip can be moved to a defined
y-position.
1. Click on the Advanced tab.
2. Click on the arrow to open the drop-
down list.
Use one of the following options:
X Enter a value in the parameter field
and confirm the entry with the Enter
key.
X Use the slider below the input field.
3. Click on the Move to y-position
button.
The Confirmation window appears.
4. If necessary, switch off the laser.
5. Check the Acknowledge box and
click OK .

The measuring tip is moved to the
entered y-position.