Primera Impressa 2, Руководство пользователя

Страница: 52 / 104

Section 6: Installing and Setting Up the Printer Driver Software for Windows 95/98 47
Digital Label and Decal Press 2 UserÕs Manual
NOTE: When printing with the Fast 32-bit Spooler or the Write Direct to Port option selected, the
Print to File option found within many Windows application programs is not supported.
The Print to File option is supported only when printing through the system print spooler
of Windows 95/98.
Disable Target & Cut
Select this option if you wish to bypass the unitÕs cut function and use only its print
function. This can be helpful if, for example, you are printing a large-format sign or
photo that does not require precision cutting.
Cut Only (Disable Print)
Select this option if you wish to bypass the unitÕs print function and use only its cut
function. When the
No Targets option is selected, the digital press operates similar
to a traditional cutter in that it is able to cut shapes and letters out of completely
blank label stock.
When the Use Pre-Existing Targets option is selected, the digital press allows you
to refeed a sheet which has already been printed but still needs to be cut. To do
this, simply load the sheet into the Media Supply Tray with the printed side facing
DOWN. Then, resend your original print job with this option selected. This option
can be helpful if, for example, you experienced some type of media jam after the
sheet was printed but before it could reach the cutter.
Orientation
Select either Portrait or Landscape. Selecting Portrait causes the page to print in a
vertical orientation. Selecting Landscape causes the page to print in a horizontal
orientation. An icon illustrating a printed page in the dialog box helps you
remember the difference between the two.
DLDP2.qxd 3/29/99 9:56 AM Page 47