Primera Impressa 2, Руководство пользователя

Страница: 27 / 104

22 Section 4: Ribbons and Print Media
Digital Label and Decal Press 2 UserÕs Manual
D. PLACING THE RIBBON CARTRIDGE INTO THE PRINTER
1. Press the Cover Release Button. Allow the cover to swing up and open.
2. With the cover open, place the Ribbon Cartridge into the printer. Be certain that
the supply end of the Ribbon Cartridge is oriented towards the rear of the
printer.
3. Close the cover. When you start to print, the notches on the Ribbon Drive Hub
will automatically engage the take-up end of the ribbon.
NOTE: When the ribbon is installed properly, the black sensing plug in the supply end of the ribbon
roll should be located in the back, left-hand corner of the unitÕs interior. This sensing plug
tells the digital press which type of ribbon is installed and MUST be present in order for the
unit to function.
E. ABOUT PRINT MEDIA
#100-Series Plain Paper Label and Decal Stock
#100-Series plain paper stock is distinguished by a GREEN-and-WHITE package
cover sheet and is designed only for use with #100-Series ribbons. Together, the
#100-Series materials produce highly durable paper labels suitable for most indoor
retail and industrial labeling applications.
#100-Series paper stock has a permanent acrylic adhesive and is available with
either a white matte or white gloss finish. All #100-Series plain paper stock has a
sheet size of 12Ó x 20Ó (305 x 508mm) and comes packaged in 100 sheet quantities.
#200-Series Polyester Label and Decal Stock
The #200-Series polyester stock is distinguished by a GRAY-and-WHITE package
cover sheet and, due to its unique composition, is the only polyester stock
DLDP2.qxd 3/29/99 9:56 AM Page 22