Primera Impressa 2, Руководство пользователя

Страница: 18 / 104

Section 3: Getting Started 13
Digital Label and Decal Press 2 UserÕs Manual
Notice that the control panel of your digital press is essentially divided in half. One
half provides controls for the Printer functions and the other half for the Cutter
functions. The reason for this, is that each of these functions works independently
of the other. This means that if the print job is canceled, for example, the cutter will
continue to cut and vice versa. The following describes the controls for each
function:
Printer Controls
The On-Line Button takes the printer on- and off-line. When the printer is on-line,
the On-Line LED light will turn ON. When the printer is off-line, the On-Line light
will turn OFF. The printer must have its On-Line light ON in order to print. When
flashing, the On-Line light also serves to indicate a print error condition. Such
conditions are discussed in Section 9 of this manual.
The Cancel button cancels the print job currently being printed. In order to cancel a
print job, the printer must first be taken off-line by pressing the On-Line button.
When the printer is off-line, the On-Line light will turn OFF. After a print job is
canceled, both LED lights will once again turn ON. Any print media remaining in
the printer will automatically eject up and out through the cutter. If the cutter is
busy cutting, the printer will wait to eject the media until after the cut job is
complete.
Cutter Controls
The Pause Button allows the cutter to either pause or resume cutting. When the
cutter is ready to cut, the Pause LED light will be OFF. When the cutter is paused,
the Pause light will turn ON. The cutter can be paused at anytime during a cut job.
When the Pause light is turned OFF, cutting will resume.
Printer
Cancel
On-Line
Cutter
Cancel
Pause
DLDP2.qxd 3/29/99 9:56 AM Page 13