Primera Impressa 2, Руководство пользователя

Страница: 50 / 104

Ribbon Type
Click on the Ribbon Type down arrow. The following ribbon selections will appear:
Spot Color Resin (#300-Series), Spot Color Wax/Resin (#100-Series), Process 3
Color Resin (#300-Series), and Process 3 Color Dye-Sub (#200-Series), Process 4
Color Dye-Sub (specialty ribbon used for printing prepress proofs), Process 4
Color Wax (specialty ribbon used for printing T-shirt transfers and wax thermal
paper labels). Select the ribbon type option thatÕs appropriate for the type of ribbon
you are using. See Sections 4-B, 4-E, and 4-F for a complete description of all
available ribbon types.
Color Matching
Click on the Color Matching down arrow and select the appropriate color matching
option. Select
None if you are more interested in print speed rather than print color,
if you have already color corrected your image for printing, or if you are using the
unitÕs optional Pantone Color Matching Software.
Select Algebraic if you would like the printer driver to make very simple, yet fast,
color balance adjustments. This option gives you more natural looking images
without actually utilizing any specific color matching software and without
slowing down the processing speed of the printer driver. In general, this option
works best when printing full-color graphics with the process 3 color resin ribbon.
The PrimaColor option is available only when the optional PrimaColor Color
Matching Upgrade is installed. Select this option to enable color matching profiles
written specifically for your printer. The PrimaColor option automatically adjusts
the color of your image according to preconfigured printer profiles and default
system profiles. This results in a very precise color match compliant with ICC
standards.
NOTE: The PrimaColor option is intended to match color hues as closely as possible. This means it
works best when printing photographic images. When printing simple spot colors, you may
notice that some colors may appear slightly muted.
Since the default system profiles provided are generic, the colors of some monitors
may still vary slightly from your output. As a solution, raw printer profiles are
included in case you would like to combine your custom monitor profiles with the
printer profiles. This can be done through third-party color matching utility
programs.
Dither Mode
This option only applies when printing with a resin or a wax/resin (#100 or #300-
Series) ribbon type. Click on the Dither Mode down arrow and select the
appropriate dither option. Selecting
Fine Dither provides a print in which the dots
of color are very close together, giving you increased clarity if the image is to be
viewed up close. Selecting
Coarse Dither provides a print where the dots are
Section 6: Installing and Setting Up the Printer Driver Software for Windows 95/98 45
Digital Label and Decal Press 2 UserÕs Manual
DLDP2.qxd 3/29/99 9:56 AM Page 45