Primera Impressa 2, Руководство пользователя

Страница: 49 / 104

44 Section 6: Installing and Setting Up the Printer Driver Software for Windows 95/98
Digital Label and Decal Press 2 UserÕs Manual
D. SETTING UP THE WINDOWS 95/98 PRINTER DRIVER
Once the printer driver has been successfully installed, you will need to set the
driver up with the appropriate print options for your specific print job. Refer to the
following steps to change or verify your printer driver options.
1. Click the Start button, point to Settings, and select Printers. Then, click on the
Digital Label Press 2 icon with the right mouse button and select Properties.
The Properties window will appear.
2. Click on the
Details
tab of the Properties window and select the
Setup
button.
NOTE: The PressPrint printing software allows you to change these same printer driver options
through the Printer Setup button of the Print window. This means that you donÕt have to
go back to the main printer setup window each time you want to change a setting or option
in the printer driver.
3. The Digital Label Press 2 Setup screen appears. Change the options as follows:
Paper Size
The digital press prints onto oversized Super B/A3-size print media. Super B/A3-
size media has a 12Ó x 20Ó (305 x 508mm) sheet size which provides a maximum
printable area of 11.71Ó x 17.3Ó (297 x 439mm). This means the digital press can
print nearly the entire width of a sheet, but that it requires a non-printable margin
of about 1.5Ó (38mm) on the top of the sheet and about 1.2Ó (30.5mm) on the
bottom.
When printing from PressPrint, note that the default Blank Size is already set to the
maximum printable area of 11.71Ó x 17.3Ó (297 x 439mm). For best results, leave the
Blank Size set to these dimensions.
Digital Label Press 2 Setup
DLDP2.qxd 3/29/99 9:56 AM Page 44