Primera DP-4202 XRP, Руководство пользователя

Страница: 43 / 56

Maintenance and Troubleshooting
39
Section 3: Maintenance and
Troubleshooting
The Publisher is designed to operate for extended periods of time
with very little attention. In fact, no regular maintenance is recom-
mended other than cleaning the outside case.
NOTE:
Do NOT attempt to oil or grease the Publisher's Robotic Arm shaft or other
components. You will likely cause more harm than good! Any moving parts
are designed to operate for the life of the machine with no additional lubri-
cation required.
A. INTERPRETING THE PUBLISHER’S INDICATORS LIGHTS
The Power and Busy LED indicator lights located on the top of the
Publisher can tell you a lot about what is happening inside the
Publisher. To accurately interpret what it means when these lights
are on, off, or flashing, please refer to the following:
Ink Cartridge Power
LED LED Publisher
off on solid Is ready to receive job
on solid on solid Has received a job and is
waiting for the Robotic Disc
Transporter to load a disc
both lights are slowly blinking Waiting for a cartridge to be
alternately with one another installed and the lid to be
closed (See Section 2-A)
both lights are blinking alternately The Publisher is initializing.
followed by only the left light You will see this pattern when
intermittently blinking for approx- the Publisher is first turned on.
imately 30 seconds Wait until the lights stop
blinking before opening
software or starting jobs.
flashing rapidly on solid The printer tray or ink
cartridge carrier has stalled.
Press the Ink button to retry
the operation.