Primera DP-4202 XRP, Руководство пользователя, Страница: 41 / 56

Creating Discs
37
If you ever wish to verify your factory-calibrated Vertical
and Horizontal calibration settings, you can run a simple
calibration procedure to assure that your images will be
centered when printed on a CD. To do this, refer to the
following steps:
1. Click Center Print Image in the Printer Settings Window.
2. Click Start Auto Calibration to begin printing the
calibration test print.
3. When the print is complete, rotate disc 180º and
put the disc back in the input bin and repeat
step 2 using the same disc.
4. When the second run of the print is complete,
you should have a test print that looks similar to the following:
5. Along the Vertical axis of the printed disc, find the number
whose lines touch. For example, in the above illustration, Enter
the number 2 into the Vertical box of the Calibration window
and 0 for the Horizontal axis.
-5 -4 -3 -2 -1 0 1 2 3 4 5
5 4 3 2 1 0 -1 -2 -3 4 -5
Horiz ontal Calibration
Find and enter the number
whose lines tough
(must be the SAME number)
Vertical Calibration
Find and enter the number
whose lines tough
(must be the SAME number)
NOTE:
After printing this image
once, rotate this CD
so the ARROWS point
to the BACK of the printer
and print again.
-5
-4
-3
-2
-1
0
1
2
3
4
5
5
4
3
2
1
0
-1
-2
-3
-4
-5
BACK BACK