12
Creating Discs
4B. Create a Label
1. Click the Create a Label button to open the SureThing CD
Labeler or Disc Cover program. These programs will allow
you to create a label.
2. Follow the instructions in Section 3 D or E to create a label
using SureThing or Disc Cover.
3. Once you have designed the label, save it and close the
program. A message will appear asking if you would like to
use the label file you just created in your current project.
Click Yes to use it in your project. Once you choose your
label a preview will be displayed.
5. After selecting your label to print it is important to check the
Printer Settings. These settings are dependent upon the specific
discs you are using. Each disc (media) brand or type has a
different sized non printable outer margin or inner diameter. It
also has a different printable surface.
For Primera TuffCoat branded discs simply choose your media
from the drop down list, the settings will be
adjusted accordingly.
Inner Diameter and Outer Margin (Printable Area).
If you have other media, you may need to measure the
unprintable outer margin and the inner diameter with a clear
millimeter ruler to find the correct size to input here. For the
outer margin, measure from the edge of the disc to the
beginning of the white
printable surface. For
the inner diameter
measure from one side
of the unprintable hub
to the other. The
unprintable inner
diameter will almost
always be larger than
the center hole of the
discs (15mm).
Содержание DP-4202 XRP
Страница 1: ...101816 511446 User s Manual 2016 All rights reserved...
Страница 55: ......
Страница 56: ...P N 511446...