Power works 2800113, Руководство пользователя

Страница: 5 / 169

English (original instructions)
5
EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
WARNING
Do not at any time let brake liquids, gasoline,
petroleum-based products, penetrating oils, etc.,
come in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic which may result
in serious personal injury.
Only the parts shown on the parts list are intended to
be repaired or replaced by the customer. All other parts
should be replaced at an Authorized Service Center.
STORING THE CULTIVATOR
The following steps should be taken before storing the
cultivator for the season.
„
Clean dirt, grass, and other materials from the entire
unit.
„
Wipe the tines with oil or spray them with silicone
lubricant to prevent rusting.
„
Oil the switch trigger cable and all visible moving
parts. Do not remove the motor cover.
„
Order new parts to replace any that are badly worn
or broken.
„
Store in an upright position in a clean, dry place.
Store with the handles in the extended position, or
loosen handle knobs and fold handles down. Do not
allow switch trigger cable to become pinched when
lowering the handlebar.
„
Store in a dry and clean place and out of reach of
children.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
Motor fails to start when
switch trigger is depressed.
Battery is not secure. To secure the battery pack, make sure the
latch on bottom of the battery pack snaps
into place.
Battery is not charged. Charge the battery pack according to the
instructions included with your model.
Motor runs but tines do not
move.
Stone or root could become
lodged in the tines.
To clear the tines, release the trigger lever.
Unplug the tiller, and dislodge or remove any
obstacles from the tines or tine shaft.
Tall grass or weeds may
become wrapped around the
tine shaft.
To ease removal of tall grass or weeds that
are wrapped around the tine shaft, remove
one or more of the tines from the tine shaft.
See Tine Removal and Installation in the
manual.
Gear train failure. Take unit to authorized service center.