- 55 -
0900-GB_QUERFÖRDERBAND_3843
CROSS CONVEYOR BELT
GB
9
10
Warning!
Do not climb on the
cross conveyor
belt when parked.
Danger of tipping
exists!
Take note!
After altering the
weight, check the
mower relieving
pressure and ad-
just if necessary.
8
8
A
Mounting the Cross Conveyor Belt
Mounting the cross conveyor belt to the mower unit is
carried in reverse order.
Setting the upper link:
A = 493mm
Connections:
A: 1 = raise left Collector
2 = raise right Collector
3 = swing left belt out
4 = swing left belt in
5 = swing right belt out
6 = swing right belt in
B: Lighting
C: Connection cable for Collector
278-09-43
B
C
A
7. Unplug connection lines:
- Unplug electrical connection lines
- Unplug hydraulic connection lines
Be aware:
Do not unplug hydraulic lines if the line
pressure is too high. To assist, screw in
the emergency actuation of the last 4 valve
blocks on the hydraulic block (under the
white hitching frame protection cover).
Take note:
After successfully unplugging the hydraulic
lines, unscrew the emergency actuation of
the last 4 valve blocks. If this is forgotten,
the cross conveyor belts swing when the
control device is actuated!
8. Lower mower unit and move freely
- Lower mower unit until cross conveyor belt lower
links (9) are free.
Beware:
Do not lower to far otherwise the upper
link bearer (10) will collide with the cross
conveyor belt spring!
- Carefully move mower unit free
9. Alter software setting
- The mower type can be altered on the control panel
in the “SET” menu (see chapter “Power Control and
ISO Bus”)
Configuration:
with cross conveyor belt
= Type: Novacat X8
Collector
without cross conveyor belt = Type: Novacat X8
