Operating Principle
The aim of processing is to roughen the wax layer (protective layer) on the blade of grass. The feed thus releases water
more easily and dries faster. Processing is carried out with V-shaped tines that are arranged in a spiral shape on the
processor shaft. The intensity is adjusted by way of a baffle plate with processor bars.
Warning!
Rotating parts,
danger of being
pulled in. Never
open or remove
protective devices
when engine is
running.
Safety note:
Read and comply
with the Opera-
ting Instructions
and particularly
the safety notes
prior to commis-
sioning.
Designations:
(1)
Adjustable swath guide plates
(2) Adjusting unit for intensity
(3)
Tine rotor
(4) Drive unit
(5)
Adjustable baffle plate
Adjustment Possibilities
The following adjustments should be made on the tine conditioner for optimum adaptation to the environmental
conditions:
Adjust processing effect:
The gap between adjusting strip and rotor is adjusted
using lever (1).
- Position (3): processing is most effective. The surface
of the crop is heavily roughened. The feed should not,
however, be broken up.
- Position (0): The surface of the crop is only slightly
roughened.
The correct setting depends among other things on the
volume of crop arising, travelling speed and tractor power.
Thus it is not possible at this point to give any binding
recommendation about the correct lever position.
1
2
3
4
5
1
3
2
1 0
355-08-15
- 39 -
0900-GB_ZINKENAUFBEREITER_3843
GB
TINE CONDITIONER
