LECOASPIRA INTELLIGENT 2.0
152
ENGLISH
may cause scaling in the long run, we recommend using a mixture of 50% tap water and 50% deminera-
lised water. To use tap water only and avoid scale formation, we recommend the addition of the special
natural scale removal agent KALSTOP FP 2003.
Do not use only demineralized water but mix it as described above with tap water.
We recommend you use original Polti products only, as products of other brands may not be suitable for
use in Polti products and could cause unwelcome difficulties. Never use distilled water or scented water.
2.B - FILLING THE BOILER DURING USE
Thanks to the self-filling system, it is no longer necessary to stop and wait before refilling the boiler
with water.
When the water in the boiler is at the minimum level, the level sensor automatically draws off water
from the tank by means of a pump which fills the boiler. When the water in the self-filling tank runs
out, the “Out of water” indicator light (
8G
) will light up and a buzzer will sound.
To continue working, just follow the indications in the paragraph “Preparing for use”.
3) SWITCHING ON
Open the built-in socket door (
9
), insert the built-in plug (
A6
) of the flexible hose (
A
) pushing it until
you hear the click of the hooking mechanism (
A7
) (Fig. 6).
Connect the power plug (
13
) to a suitable electric socket.
Switch on the appliance by pressing the power switch (
1
) (fig.7). A buzzer indicates that the ap-
pliance has been turned on correctly, and it starts automatically in manual mode MA.
N.B. The handle of the flexible hose
(A2)
is fitted with a safety button
(A3)
to prevent the acciden-
tal activation of steam delivery by children or people who do not know how it works. Should the ap-
pliance be left momentarily unguarded, move the safety button
(A3)
to the off position. To continue
steam delivery, move the switch back to its original position.
4) HOW TO USE
Lecoaspira Intelligent 2.0 can be used two different ways:
MANUAL OR PROGRAMMED.
MANUAL MODE: envisages the possibility of manually adjusting the quantity of water dispensed
and the suction power based on need and the surfaces to be cleaned.
PROGRAMMED MODE: allows you to choose from 10 pre-set cleaning programmes. Every pro-
gramme is developed to automatically dispense, in sequence, the amount of steam and suction
power necessary to clean a specific surface. In programmes that envisage the use of the two fun-
ctions, steam and suction, the suction function starts automatically after the steam function and
lasts in proportion to that of the steam, enabling the surface treated to dry.
The times that steam and suction are supplied have been carefully calibrated for various types of
LECOASPIRA INTELLIGENT vers. 2012_mod7:Layout 1
11/04/2012
8.49
Pagina 152
