LECOASPIRA INTELLIGENT 2.0
151
ENGLISH
Lecoaspira Intelligent 2.0 s a multi-function appliance which, depending on the need and type of
cleaning you want to do, can be used:
- Just as a vacuum to remove dust from surfaces. In this case, remember to add water to the dirt
collection container (see Paragraph 1 of the “preparing for use”)
- Just as a steam cleaner to sanitise surfaces. For this feature, the container must be filled with wa-
ter to supply the boiler (see Paragraph 2 of the “preparing for use”)
- To use the suction and steam features at the same time to vacuum, wash and dry at the same
time. Naturally, in this case both the dirt collection container and the tank must be filled.
PREPARING FOR USE
1) IF YOU HAVE TO VACUUM:
1.A ) FILL THE DIRT COLLECTION CONTAINER/FILTER WITH WATER
Lift the handle (
22
) of the dirt collection container (
20
) (fig. 2). Remove the container (
20
) dfrom its hou-
sing , turn the handle (
22
) of the container backwards (fig. 3) in order to remove the “Eco-Active” filter
assembly (
23
). Fill the container with about 1,2 l of plain tap water up to the MAX indicator (
21
).
You can also add Bioecologico, the natural, anti-foam liquid and deodorant to the container which, in ad-
dition to filling the room with a pleasant perfume, prevents the formation of foam in the water filter, guaran-
teeing the correct operation of the appliance. (For more detailed information please refer to the specific
paragraph).
Replace the filter assembly (
23
) in the dirt container (
20
) returning it to its original position. Reposition the
dirt container (
20
) in the specific space and turn the handle until it returns to its starting position.
1.B ) WATER REPLACEMENT DURING USE
Dust, solids or liquids can be vacuumed equally with this product.
When the dirt sucked into the water container (
20
) reaches the maximum allowed level, suction will
be automatically blocked by the special safety float. This can also occur when the water in the contai-
ner is very dirty. In these cases, there is an increase in the motor rpm and after 10 seconds the ap-
pliance automatically pauses; the suction speed lights (
8C
) and the suction light (
8E
) flash. When this
occurs, the water must be replaced in the container.
Turn off the appliance and only restart it when the level of the water in the container has been resto-
red as described in the chapter “Emptying and cleaning the dirt container”.
Any immediate restarting when the appliance has gone into pause mode can damage the air outlet
filter.
2) IF YOU NEED TO USE THE STEAM FEATURE:
2.A - FILLING THE TANK
Turn the cap of the tank outwards
(7)
(fig. 1). Fill the self-filling tank with approx. 560 cc – in any case
to above the maximum level of the float (Fig. 2) – of normal water using the filler bottle
(Q)
.
N.B. Ordinary tap water may also be used. However, since water contains limestone by nature, which
LECOASPIRA INTELLIGENT vers. 2012_mod7:Layout 1
11/04/2012
8.49
Pagina 151
