LECOASPIRA INTELLIGENT 2.0
170
ENGLISH
B3) REMOVING STAINS FROM CARPETS/UPHOLSTERY
ACCESSORIES TO BE USED: accessory 120° (
E
) as per the following table:
ACCESSORIES
REFERENCE
LETTER
PHOTOGRAPH
FUNCTION
120º acc cloth
E + O2
Steam delivery
+
STEAM-VACUUM FUNCTION
To eliminate a specific mark
MANUAL MODE
PROGRAMMED MODE
After turning on the boiler, by following the
instructions listed in the paragraph “SET THE
STEAM LEVEL IN MANUAL MODE”, set the
steam pressure on Level 4.
Press the button (
A5
) on the handle to dispen-
se steam over the surface to be treated. To stop
the steam flow, simply release the button (
A5
).
PROGRAMME P4
Set the P4 programme described in the para-
graph “TO USE THE APPLIANCE WITH THE
PRE-SET PROGRAMMES”.
Start the programme by pressing and holding
down the steam dispenser button (
A5
). When
the button (
A5
) is released, suction will automa-
tically start. IF YOU NEED TO RESTART THE
PROGRAMME TO COMPLETE CLEANING
THE ENTIRE SURFACE, JUST PRESS THE
BUTTON (
A5
) AGAIN.
In any case, it is possible to stop the program-
me manually by pressing the suction button
(
A4
).
N.B. Direct the steam directly onto the mark with the greatest possible angle (never vertically to
the surface to be treated) and position a cloth beyond the stain, in order to collect up the dirt
that has been "blown" away by the steam pressure.
N.B. N.B. If there are remains of dirt or humidity, you can attach the 120° accessory (
E
), the most
suitable accessory for your needs (steam lance
F
, small suction nozzle
E2
). Then activate suc-
tion by means of the button (
A4
) to finish work on the surface treated.
Holding the button (
A4
) down, select the desired suction speed, (see paragraph SET THE SUC-
TION LEVEL IN MANUAL MODE).
LECOASPIRA INTELLIGENT vers. 2012_mod7:Layout 1
11/04/2012
8.49
Pagina 170
