LECOASPIRA INTELLIGENT 2.0
180
ENGLISH
4) WASHABLE HEPA FILTER
ATTENTION: the HEPA filter (
17
) included with Vaporetto Lecoaspira is washable. To clean the
filters, proceed as follows:
• Unhook the water container handle (
22
) and remove the container (
20
) as described in the chap-
ter “PREPARING FOR USE”.
• Lift the HEPA filter release lever and remove the filter (
18
) from its housing (fig.12).
• Rinse the filter under cold running water.
After washing it, shake it gently to eliminate any reside of dirt and excess water.
NOTE: allow the filter to dry naturally, away from direct sources of light and heat. It is advisable
to wait 24 hours before replacing the filter in the appliance.
• Replace the filter with a new one if it is torn.
• The filter should be cleaned every 4 months.
• To correctly position the HEPA filter (
17
) make sure that it is lodged in its housings (
19
) and is
then blocked by the lever (
18
) (Fig.14).
ATTENTION:
• Do not clean the filter with the brush as it can be damaged, thereby reducing its filtering capacity.
• Do not use detergents, do not rub the filter, and do not wash it in a dishwasher.
GENERAL MAINTENANCE
Before any kind of maintenance, make sure that the power cable is not plugged in
to the mains.
After using the brushes, we recommend letting the bristles cool down in their natural position, in
order to avoid any deformation.
Regularly check the status of the seals located in the monoblock socket (
A6
). If necessary, repla-
ce with the appropriate spare part (
P
).
Perform the same check on the connection seals of the extension tubes (
B
and
B1
) and the han-
dle (
A2
).
To clean the outside, simply use a moist cloth. Do not use solvents or detergents as these could
damage the plastic surfaces.
To clean the “Eco-Active” water filter cage and to clean or replace the sponge filter, proceed as
described in the paragraph “EMPTYING AND CLEANING THE DIRT CONTAINER.”
RECOMMENDATIONS FOR CLEANING DELICATE SURFACES
Before steam treating leather, special fabrics and wood surfaces, consult the manufacturer’s
instructions and always carry out a test on a hidden part or on a sample of the material. Allow the
steamed part to dry to make sure that no changes in colour or deformations have occurred.
Please pay careful attention when cleaning wooden surfaces (furniture, doors, etc.). and treated
terracotta flooring as prolonged use of steam may damage the wax, polish or colour of the surfa-
ces to be cleaned.
We therefore recommend only steaming these surfaces for short periods of time, or cleaning using
a previously steamed cloth.
On particularly delicate surfaces (i.e. synthetic materials, lacquered surfaces, etc.) we recommend
using minimum steam.
To clean glass surfaces in particularly cold seasons, preheat the windows starting from a distance
of about 50 cm from the surface. To take care of your plants, we recommend spraying them from
a minimum distance of 50 cm.
LECOASPIRA INTELLIGENT vers. 2012_mod7:Layout 1
11/04/2012
8.49
Pagina 180
