LECOASPIRA INTELLIGENT 2.0
163
ENGLISH
PARQUET AND TERRACOTTA
VACUUM FUNCTION
To vacuum up dirt and dust on parquet/terracotta
MANUAL MODE
PROGRAMMED MODE
Press the suction button (
A4
) o begin vacuu-
ming. Adjust suction to level 3 (see specific
paragraph) to vacuum up dust or liquid.
To stop suction, just press the button (
A4
).
PROGRAMME P0
Set the P0 programme described in the para-
graph “TO USE THE APPLIANCE WITH THE
PRE-SET PROGRAMMES”.
Holding the suction button down (
A4
) suction
will be activated at the maximum pressure. It is
possible to stop the programme manually by
pressing the button (
A4
) again.
STEAM-VACUUM FUNCTION
To wash the parquet/terracotta
N.B. To prevent steam temperature or pressure from damaging the parquet/terracotta, use the
brush with the inserts, always wrapping it in a parquet cloth.
We recommend alternating steam delivery with
the activation of the suction function, in order to
avoid leaving the parquet or the terracotta damp
for long periods of time. The steam and suction
functions can also be used simultaneously.
The programme automatically alternates steam
and suction.
After turning on the boiler, by following the
instructions listed in the paragraph “SET THE
STEAM LEVEL IN MANUAL MODE”, set the
steam pressure on Level 2. Press the button
(
A5
) on the handle to dispense steam over the
surface to be cleaned. To stop the steam flow,
simply release the button (
A5
).
Then activate suction by means of the button
(
A4)
to dry the surface treated. Holding the but-
ton (
A4
) down, select the desired suction speed,
see paragraph “SET THE SUCTION LEVEL IN
MANUAL MODE”.
PROGRAMME P2
Set the P2 programme described in the para-
graph “TO USE THE APPLIANCE WITH THE
PRE-SET PROGRAMMES”.
Holding the steam button (
A5
) down intermittent
steam is supplied and at the same time suction
starts.
Release the button (
A5
) to stop the steam flow,
while suction will continue for a few seconds
more to dry the surface treated.
IF YOU NEED TO RESTART THE PROGRAM-
ME TO COMPLETE CLEANING THE ENTIRE
SURFACE, JUST PRESS THE BUTTON (
A5
)
AGAIN.
N.B. Before steaming surfaces, we recommend vacuuming up any hair or dust, using the
vacuum only function in manual mode.
LECOASPIRA INTELLIGENT vers. 2012_mod7:Layout 1
11/04/2012
8.49
Pagina 163