LECOASPIRA INTELLIGENT 2.0
175
ENGLISH
B7) PLANTS AND HUMIDIFICATION OF THE ROOMS
ACCESSORIES TO BE USED: we recommend using the flexible hose (
A
).
S) PROFESSIONAL IRON (OPTIONAL ACCESSORY) PROGRAMME P9
Vaporetto Lecoaspira Intelligent 2.0 can quickly become an extremely efficient ironing
system, allowing you to iron more quickly and with less effort. Simply connect the iron
accessory to the product for Vaporetto Lecoaspira (Mod. PFEU0021). The iron can be pur-
chased from Polti service centres and the best electrical appliance stores.
• Connect to the built-in socket (
10
) the built-in plug (
A6
) of the iron (
S
), set Programme 9 as descri-
bed in the paragraph “To use the appliance with the pre-set programmes” .
The amount of steam supplied is adjusted manually depending on your needs with the UP (
4
) and
DOWN (
5
) buttons and is displayed by the indicators (
8B
) lighting up. Follow the instructions li-
sted below to adjust the amount of steam in relation to the fabric being ironed:
STEAM FUNCTION
Dust can be removed from the leaves and flowers of house plants, refreshing them. Plants brea-
the better and will be cleaner and brighter.Steam can also be used to refresh rooms. Steam use
is also recommended in areas where people smoke.
MANUAL MODE
PROGRAMMED MODE
After turning on the boiler, by following the
instructions listed in the paragraph “SET THE
STEAM LEVEL IN MANUAL MODE”, set the
steam pressure on Level 1.
Press the button (
A5
) on the handle to dispen-
se steam over the surface to be cleaned. To
stop the steam flow, simply release the button
(
A5)
.
PROGRAMME P8
Set the P8 programme described in the para-
graph “TO USE THE APPLIANCE WITH THE
PRE-SET PROGRAMMES”.
Holding the steam dispenser button
(A5)
down,
steam is supplied. To end this supply, simply
release the button (
A5
).
N.B. To take care of your plants, we recommend spraying them from a minimum distance 50 cm.
LECOASPIRA INTELLIGENT vers. 2012_mod7:Layout 1
11/04/2012
8.49
Pagina 175
