LECOASPIRA INTELLIGENT 2.0
159
ENGLISH
HARD FLOORS (MARBLE, GRANITE, TILE)
VACUUM FUNCTION
vacuum up dust and liquids or effectively remove animal hair
MANUAL MODE
PROGRAMMED MODE
Press the suction button (
A4
) to begin vacuu-
ming. Adjust suction to level 4 (see specific
paragraph) to vacuum up dust or liquid.
To stop suction, just press the button (
A4
).
PROGRAMME P0
Set the P0 programme described in the para-
graph “TO USE THE APPLIANCE WITH THE
PRE-SET PROGRAMMES”.
Holding the suction button down (
A4
) suction
will be activated at the maximum pressure. It is
possible to stop the programme manually by
pressing the button (
A4
) again.
STEAM AND VACUUM FUNCTION
Wash and vacuum even the dirtiest floors. This function enables the sanitisation of all types of
hard flooring, such as marble, granite and ceramic.
N.B. Before steaming surfaces, we recommend vacuuming up any hair or dust, using the
vacuum only function in manual mode or with the P0 programme.
After turning on the boiler, by following the
instructions listed in the paragraph “SET THE
STEAM LEVEL IN MANUAL MODE”, set the
steam pressure on Level 2 or 3 based on how
dirty the surface being treated is.
Press the button (
A5
) on the handle to dispen-
se steam over the surface to be cleaned. To
stop the steam flow, simply release the button
(
A5
).
Then activate suction by means of the button
(
A4
) to dry the surface being treated. Holding
the button (
A4
) down, select the desired suc-
tion speed, see paragraph “SET THE SUC-
TION LEVEL IN MANUAL MODE”.
PROGRAMME P1
Set the P1 programme described in the para-
graph “TO USE THE APPLIANCE WITH THE
PRE-SET PROGRAMMES” (pages 10/11).
Holding the steam button (
A5
) down, steam is
supplied. When releasing the button (
A5
) or
after a maximum of 150 seconds, the suction
starts automatically to dry the treated surface.
Suction stops automatically after a period of
time in proportion to the time the steam was
supplied. IF YOU NEED TO RESTART THE
PROGRAMME TO COMPLETE CLEANING
THE ENTIRE SURFACE, JUST PRESS THE
BUTTON (
A5
) AGAIN.
In any case, it is possible to stop the program-
me manually by pressing the suction button
(
A4
).
N.B. If the floor is not very dirty, you can activate steam and vacuum together, to wash and dry
at the same time.
LECOASPIRA INTELLIGENT vers. 2012_mod7:Layout 1
11/04/2012
8.49
Pagina 159