LECOASPIRA INTELLIGENT 2.0
157
ENGLISH
- Check that it is firmly connected.
- There is also a lock button on the steam-suction extension tubes
-
B
and
B1
: proceed as above for the accessories, releasing the tubes by sliding the button as far
as the lock position (Fig. A3).
- To connect the special accessories only for suction
(E2-F-G-H-I-L)
it is only necessary to attach
them without coupling them to the locknut.
To connect the steam lance
(E1)
with the 120° accessory
(E)
, just screw it on. The same operation
can be carried out for the coloured brushes
(E3)
, which can in turn be screwed onto the 120° ac-
cessory
(E)
and onto the steam lance
(E1)
. The different colours allow you to always use the same
brush for the same surface.
7.5) FITTING INSERTS
To fit the inserts on the universal brush
(C)
:
To fit the insert
(C1 - C2 - C3)
, move outwards the two slides
(C4)
on the back of the brush. Fit the
insert into the lower part of the brush and block it by moving the slides
(C4)
inwards.
To fit the inserts on the steam-suction nozzle
(D)
:
To fit the insert
(D1 - D2 - D3)
, first insert the external side
(1c)
, then turn it until it clicks into place
(2c)
.
Fig. A1
Fig. A2
Fig. A3
1c
2c
LECOASPIRA INTELLIGENT vers. 2012_mod7:Layout 1
11/04/2012
8.49
Pagina 157
