POLTI VAPORETTO LECOASPIRA INTELLIGENT 2.0 Скачать руководство пользователя страница 40

Страница: 40 / 40

LECOASPIRA INTELLIGENT 2.0

181

ENGLISH

TROUBLESHOOTING

TROUBLE

CAUSE

SOLUTION

The suction fan does not start

No power supply

Check the cable, plug and socket

The boiler filling pump can be
heard working continuously

Air in the boiler circuit.

Switch off the appliance, allow it to
cool and repeat the operations de-
scribed in the “SWITCHING ON ”
chapter.

The suction power drops

The upholstery nozzle, the
flexible tube or the stiff suc-
tion tube are clogged.

The HEPA filter is exhausted

Clen the filter and remove any
obstruction from the tubes and ac-
cessories.

Follow the instructions in the para-
graph headed "WASHABLE HEPA
FILTER".

Water leaks out when vacuuming
liquids

Float blocked.

Clean the "Eco-Active” water filter
assembly

The vacuum cleaner shuts down
while vacuuming and the suction
speed indicators (8C) and suc-
tion indicator (8E) flash.

The liquid level in the water
container is too high.

The selected power level is
too high for the surface being
cleaned.

Proceed as described in the section on
“Emptying and cleaning the water con-
tainer” to resume cleaning.

Press the main switch (1), unplug the
power cable and leave the appliance
unplugged for at least 30 seconds to al-
low the safety device to reset.

The appliance shuts down and
“E1” appears on the display.

The electronic card has de-
tected low water level in the
boiler.

Turn off the appliance for a few mi-
nutes and then turn it back on. If the
problem appears again, contact an
authorised service centre.

The appliance shuts down and
“E2” appears on the display.

The electronic card has de-
tected an incorrect operating
temperature.

Turn off the appliance for a few mi-
nutes and then turn it back on. If the
problem appears again, contact an
authorised service centre

LECOASPIRA INTELLIGENT vers. 2012_mod7:Layout 1

11/04/2012

8.49

Pagina 181

Содержание VAPORETTO LECOASPIRA INTELLIGENT 2.0









































Результаты поиска

Содержание VAPORETTO LECOASPIRA INTELLIGENT 2.0

Отзывы:

Похожие инструкции для VAPORETTO LECOASPIRA INTELLIGENT 2.0

Бренды по названию

Популярные бренды

POLTI VAPORETTO LECOASPIRA INTELLIGENT 2.0, Инструкции по использованию

Результаты поиска

Содержание VAPORETTO LECOASPIRA INTELLIGENT 2.0

Отзывы:

Похожие инструкции для VAPORETTO LECOASPIRA INTELLIGENT 2.0

Бренды по названию

Популярные бренды