Polaris 600 EDGE RMK, Руководство по обслуживанию

Страница: 306 / 392

SUSPENSIONS
7.45
Suspension Troubleshooting - XTRA Lite Style
Problem Solution
Rear suspension bottoms too easily -Increase torsion spring preload
-Increase rear shock compression valving by turning
screw clockwise (if equipped with optional Indy Select
shock)
Rides too stiff in rear -Check for binding suspension shafts and grease all pivot
points
-Decrease torsion spring preload adjustments
-Decrease rear shock compression valving by turning
screw counterclockwise (if equipped with optional Indy
Select shock)
Machine darts from side to side -Make sure skis are aligned properly (straight
forward with rider on machine)
-Make sure spindles and all steering components are
free turning
-Make sure skags are straight on skis
-Check hi-fax and replace if worn
-Reduce ski pressure:
D
Increase front track spring preload
D
Reduce IFS spring preload if shims have
been added
D
Reduce rear torsion spring preload
Front end pushes -Check for worn skags
-Check for binding suspension shafts and grease all pivot
points
-Increase IFS spring preload by adding shims
Steering is heavy -Check ski alignment
-Check skags and skis for damage
-Reduce ski pressure:
D
Increase front track spring preload
D
Reduce IFS spring preload if shims have
been added
D
Reduce rear torsion spring preload
Setting up for deep snow operation -Change worn hi-fax
-Lower front and rear torque arms (see Performance sec-
tion at the back of this manual)