Polaris 600 EDGE RMK, Руководство по обслуживанию

Страница: 267 / 392

SUSPENSIONS
7.6
Hi-Fax Replacement - All Models
Hi-Fax replacement on all Polaris models is similar.
When any area of the Hi-Fax is worn to 1/8 ² (.3 cm), it
should be replaced. This will save wear on other vital
components.
The slide rail is designed to operate in conditions with ad-
equate snow cover to provide sufficient lubrication. Ex-
cessive wear may be due to improper alignment, improp-
er track adjustment or machine operation on surfaces
without snow.
Replace Hi-Fax when worn to 3/8
² (.95 cm) on XTRA 10
and 7/16 ² (1.1 cm) on EDGE RMK and XTRA Lite style
suspensions.
Hi-Fax Removal
1. Remove suspension from machine.
NOTE: Some models may allow Hi Fax to be removed by sliding it through track windows with the suspension
mounted in the machine.
2. Remove front Hi-Fax retaining bolt.
3. Use a block of wood or a drift punch and hammer to drive Hi-Fax rearward off the slide rail.
4. With Hi-Fax material at room temperature, install new Hi-Fax by reversing steps 1 - 3.
NOTE: Lightly coat Hi-Fax track clip area with a lubricant such as LPS2 or WD-40 to ease installation.
NOTE: Wide Hi-Fax should be narrowed on the leading sides to allow it to fit through narrow windows.
Hi Fax Wear Limit
7/16 ² (1.1 cm)
XTRA Lite
7/16 ² (1.1 cm)
2002 Edge RMK PN 5521581
*2002 Edge RMK HyFax will
NOT fit on 2001 units.
3/8 ²
All XTRA 10/12 PN 5521452
Suggested Hi Fax Wear Limit:
XTRA Lite - 7/16
²
(1.1 cm)
EDGE RMK -- 7/16” (1.1cm.)