Polaris 600 EDGE RMK, Руководство по обслуживанию

Страница: 277 / 392

SUSPENSIONS
7.16
The RRSS controls weight transfer from the rear sus-
pension to the skis. It also influences the stiffness of the
ride by controlling the amount of coupling action be-
tween the front and rear torque arms. To increase the
stiffness of the suspension, the RRSS should be set in
the high position.
NOTE: On XTRA-10 and EDGE models only, the RRSS
can be totally removed for maximum weight transfer.
However, unless the torsion springs and rear shock valv-
ing are changed, the ride will be compromised. Always
maintain equal adjustment on both sides.
Be sure rear scissor stop face is square with the face of
the scissor arm to ensure complete contact.
Rear Spring Tension
Rear spring tension adjustments are made by rotating
the eccentric spring block (A) as shown with the engine
spark plug tool. The block provides three spring tension
positions. This adjustment is easier if the long spring leg
is lifted over the roller and replaced after the block is
properly positioned. Always maintain equal adjustment
on both sides.
FRSS - low position shown
RRSS - low
position shown
FRSS - medium position shown
RRSS - high
position shown
Scissor Stop Block Position
Medium
High
Low
Low
Soft Tension Long End to Front
Medium Tension (Short End Up) Firm Tension (Long End Up)
A
A
A