manualshive.com logo in svg

Polaris 2009 Outlaw 450 MXR, Руководство пользователя

Поделиться
Скачать
Polaris 2009 Outlaw 450 MXR Скачать руководство пользователя страница 47

44

Features and Controls

Throttle Lever

Operating an ATV with sticking or improperly operating throttle controls could cause an accident. Never 

start or operate an ATV that has a sticking or improperly operating throttle. Always contact your dealer 

for service before operating the vehicle.
Failure to check or maintain proper operation of the throttle system can result in an accident if the 

throttle lever sticks during operation. Always check the lever for free movement and return before 

starting the engine. Also check occasionally during operation.
Modifications to the electronic throttle control could result in failure to perform as designed, which could 

result in an accident. Do not attempt to modify the throttle control system or replace it with any after 

market throttle mechanisms. Always ensure that the throttle cable is properly installed to the throttle 

control.

WARNING

Содержание 2009 Outlaw 450 MXR














































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды