Polaris 2009 Outlaw 450 MXR Скачать руководство пользователя

Страница: 18 / 205

Safety

Safety Warnings

Failure to operate the ATV properly can result in a collision, loss of control, accident or overturn, which

may result in serious injury or death. Heed all safety warnings outlined in this section of the owner’s

manual. See the OPERATION section of the owner’s manual for proper operating procedures.

Operator Restrictions/Age Restrictions

This vehicle is an ADULT VEHICLE ONLY. Operation is prohibited for

anyone under 16 years of age. This category S (Sport) ATV is a high

performance vehicle intended for off road use only, for sport-type

recreation and for competitive use by operators with advanced skills

and substantial experience.
Even though a child may be within the recommended age group for

operating some ATVs, he/she may not have the skills, abilities, or

judgment needed to operate an ATV safely and could be susceptible to

accident or injury.

WARNING

Содержание 2009 Outlaw 450 MXR














































































































































































































Результаты поиска

Содержание 2009 Outlaw 450 MXR

Отзывы:

Похожие инструкции для 2009 Outlaw 450 MXR

Бренды по названию

Популярные бренды

Polaris 2009 Outlaw 450 MXR, Руководство пользователя

Результаты поиска

Содержание 2009 Outlaw 450 MXR

Отзывы:

Похожие инструкции для 2009 Outlaw 450 MXR

Бренды по названию

Популярные бренды