1
2
3
PUM_SBT_091102_EN
7/38
7.
DELIVERY
Side brace clamp kit
The kit includes two aluminium brackets for one or two
side braces.
Adjustable mounting kit (vertical)
The two brackets are exactly the same. They can also be
used if the roof is angled and they can be mounted in both
directions. Maximum angle is 30 degrees.
In order to fasten the bracket to the support leg three
through holes have to be drilled. Start by drilling hole ”1”
and ”2”.
Then adjust the bracket to an exact position and fix it by
drilling a third hole ”3”, using the most centrered hole
from the top row.
Adjustable mounting kit (horizontal)
The bracket that shall be used against the wall is the same as for
the vertical kit (see above) but on the track side there is a new
bracket which is adjusable in relation to the support leg.
When the bracket is fixed in the right position two through
holes in the support legs two holes are drilled through the
support leg using the bracket as a template.
Prod. No. SBT-SBCK
Art.No. 8130-1011
Prod. No. SBT-MKH
Art. No 8160-1011
Prod. No. SBT-MKV
Art. No. 8150-1011
