8
8
8
7
Inspection and maintenance: Continued:
4. Check the correct attachment of the safety chain attaching
the balancer to the trolley.
5. Ensure the hose has the correct distance to the floor.
Spring tension must be adjusted when required.
6. Check the correct movement of the trolley, correct
function of the release valve and end-stops.
7. Check that the trolley trip plate activates the release valve
correctly. The release valve must be activated to 1mm from
bottom position.
8. Check the balancer - see separate manual
9. Disconnect the hose from the balancer and inspect the
hose for any faults.
10. Check if the saddle is correctly supporting the hose.
11. Disassemble the Safety disconnect and clean.
12. Ensure the hose is in the correct installation position ( see
hose connection procedure).
6
6
6
4
PUM_SBT_091102_EN
34/38
10.
MAINTENANCE INSTRUCTION
