Playnation Everest Extreme 1500MW, Инструкция по эксплуатации

Страница: 208 / 234

1" TO 1-3/4"
STEP 20: BRIDGE DECK / CHAIN INSTALLATION
1: TWO PEOPLE MAY BE REQUIRED FOR THIS STEP.
2: THERE SHOULD BE AT LEAST A 1" TO 1-3/4" GAP BETWEEN THE BRIDGE DECK BOARD AND THE FRONT FACE BOARD
ON THE PLAY SET. THIS MEANS THAT YOU WILL HAVE TO CONNECT THE ENDS OF THE CHAINS IN A MANNER TO
ACHIEVE THE CORRECT GAP. IN ORDER TO ACHIEVE THE GAP YOUR ASSISTANT MAY HAVE TO LIFT UP THE BRIDGE
DECK ASSEMBLY WHILE YOU CONNECT THE CHAINS TOGETHER WITH THE QUICK LINK UNDER THE PLAY SET DECK. IF
YOU HAVE LOOSE ENDS OF THE CHAINS HANGING DOWN THREAD THEM THROUGH THE QUICK LINK TO KEEP THEM
UP AND OUT OF THE WAY.
3: THREAD THE CHAIN ENDS IN THE BRIDGE DECK ASSEMBLY THROUGH THE HOLES IN THE FRONT FACE BOARD AT
THE FRONT OF THE PLAY SET. THEN THREAD EACH CHAIN THROUGH THE HOLES IN THE DECK SUPPORT. CONNECT
THE LEFT CHAIN TO THE RIGHT CHAIN WITH A QUICK LINK.
A
ETC. TOGETHER
2 X 6 X 70" FRONT FACE BOARD
4 X 4 X 70" UNDER DECK SUPPORT
NOTE: TO ACHIEVE THE CORRECT
GAP YOU MAY NOT BE
CONNECTING THE END LINK OF
EACH CHAIN. FOR EXAMPLE YOU
MAY HAVE TO CONNECT THE
SECOND, THIRD, FOURTH LINKS,
QUICK LINK
198