Playnation Everest Extreme 1500MW, Инструкция по эксплуатации

Страница: 172 / 234

STEP 95A: MONKEY BAR FILLER BOARD
1: MEASURE THE GAP BETWEEN THE MONKEY BAR MOUNT AND THE TOP PANEL BOARD
(RAILING). IF THE DISTANCE IS 3-1/2" OR MORE THEN USE THE 2 X 4 X 35.5" TOP PANEL BOARD
(FILLER BOARD) TO CLOSE UP THE OPENING. ATTACH IT TO THE LOWER LEVEL CORNER POST
AND CONNECTOR POST WITH 5/16" X 3-1/2" LAG SCREWS AND 5/16" WASHERS.
2: IF THE GAP BETWEEN THE MONKEY BAR MOUNT AND THE TOP PANEL BOARD (RAILING) IS LESS
THAN 3-1/2" THEN LEAVE THAT AREA OPEN. NOW MEASURE THE DISTANCE BETWEEN THE TOP OF
THE MONKEY BAR ASSEMBLY AND THE ROOF FINISHER. IF THE DISTANCE IS 3-1/2" OR MORE THEN
USE THE 2 X 4 X 35.5" TOP PANEL BOARD (FILLER BOARD) TO CLOSE UP THAT OPENING. ATTACH
IT TO THE LOWER CORNER POST AND CONNECTOR POST WITH 5/16" X 3-1/2" LAG SCREWS AND
5/16" WASHERS.
3: IF BOTH OPENINGS (BELOW AND ABOVE THE MONKEY BAR ASSEMBLY) ARE LESS THAN 3-1/2"
THEN THE 2 X 4 X 35.5" TOP PANEL BOARD (FILLER BOARD) WON'T BE USED.
MONKEY BAR MOUNT
3-1/2" OR M
ORE
e.g.
POST
LESS THAN
3-1/2"
e.g.
) FILLER BOARD BOARD (
2 X 4 X 35.5" TOP PANEL
) RAILING
ROOF FINISHER
MONKEY BAR ASSEMBLY
5/16" X 3-1/2" LAG SCREW
CORNER POST
LOWER LEVEL
TOP PANEL BOARD
(
CONNECTOR
5/16" WASHER
162