Playnation Everest Extreme 1500MW, Инструкция по эксплуатации

Страница: 187 / 234

(REAR VIEW)
ON / OFF SWITCH
SOLAR WALL LIGHT
MOUNTING SLOT
1" WOOD SCREW
SOLAR WALL LIGHT
1 X 4 X 21" WINDOW
PANEL BOARD
10"
8 58 "
STEP 110: SOLAR WALL LIGHTS
1: WITH A PENCIL MAKE A CENTER MARK ON THE OUTSIDE FACE OF THE 1 X 4 X 21" WINDOW
PANEL BOARD, MEASURE 8-5/8" HORIZONTALLY FROM THE OUTSIDE EDGE OF THE CORNER POST
TOWARDS THE CENTER OF THE WALL PANEL BOARD AND 10" FROM THE TOP EDGE OF THE
FRONT TOP PANEL BOARD UP TOWARDS THE CENTER OF THE WALL PANEL BOARD AS SHOWN IN
THE DIAGRAM BELOW.
2: PARTIALLY INSERT A #8 X 1" WOOD SCREW INTO THE WALL PANEL BOARD CENTER MARK
FROM PREVIOUS SUB-STEP, MAKE SURE THE HEAD OF THE SCREW IS STICKING OUT ABOUT 3/8"
FROM THE OUTSIDE FACE OF THE WALL PANEL BOARD.
3: MOUNT THE SOLAR WALL LIGHT ONTO THE WALL USING THE HEAD OF THE WOOD SCREW AS
A HANGER INTO THE SLOT LOCATED IN THE BACK OF THE SOLAR WALL LIGHT. THE ON/OFF
SWITCH IS LOCATED IN THE BOTTOM REAR END OF THE SOLAR WALL LIGHT. YOU CAN ACCESS
THIS SWITCH BY REMOVING THE SOLAR WALL LIGHT FROM THE PLAY SET.
4: REPEAT SUB-STEPS 1 TO 3 FOR THE OTHER SIDE.
177