Connecting your equipment
03
21
en
7
SIRIUS Radio input
See
Connecting a SiriusConnect™ tuner
on page 37.
8
Remote inputs/output
Use for connection to an external remote control sensor
for use in a MULTI-ZONE setup, for example.
See
Connecting an IR receiver
on page 40.
9
Control input/output
Use to connect other Pioneer components so that you
can control all your equipment from a single IR remote
sensor.
See
Operating other Pioneer components with this
unit’s sensor
on page 40.
10 RS-232C connector
Use for connection to a PC for graphical output when
using Advanced MCACC or Full Band Phase Control.
See
Connecting a PC for Advanced MCACC output
on
page 41.
11 Component video inputs (x3)
Use the inputs to connect any video source that has
component video output, such as a DVD player.
See
Connecting your DVD player with no HDMI output
on page 30.
12
SC-27 only:
ZONE 2 component video output
Use to connect monitors or TVs in a separate room.
See
MULTI-ZONE setup
on page 38.
13 MULTI-ZONE audio/video outputs
Use to connect a second or third amplifier and monitors
or TVs in a separate room.
See
MULTI-ZONE setup
on page 38.
14 Composite, S-Video and Component video monitor
outputs
Use to connect monitors and TVs.
See
Connecting your TV with no HDMI input
on
page 31.
15 Stereo analog audio source inputs (x3)/output (x1)
Use for connection to audio sources such as CD players,
tape decks, turntables, etc.
See
Connecting other audio components
on page 35.
16 Audio/video source inputs (x5)/output (x1)
Use for connection to audio/visual sources, such as DVD
players/recorders, VCRs, etc. Each set of inputs has jacks
for composite video, S-Video and stereo analog audio.
See
Connecting an HDD/DVD recorder, VCR and other
video sources
on page 33.
17 AM and FM antenna terminals
Use to connect indoor or outdoor antennas for radio
broadcasts.
See
Connecting AM/FM antennas
on page 36.
18 Multichannel pre-amplifier outputs
Use to connect separate amplifiers for front, center,
surround, surround back and subwoofer channels.
See
Connecting additional amplifiers
on page 36 (see
also
Installing your speaker system
on page 25 for
powered subwoofer connection).
19 Multichannel analog audio inputs
7.1 channel inputs for connection to a DVD player with
multichannel analog outputs.
See
Connecting the multichannel analog inputs
on
page 34.
20 Speaker terminals
Use for connection to the main front, center, surround
and surround back speakers.
See
Connecting the speakers
on page 24.
21 AC power inlet
Connect the supplied power cord here.
See
Plugging in the receiver
on page 44.
SC-27_25.book Page 21 Monday, April 6, 2009 7:15 PM
