28
En
* Car shuttle trains are used to transport vehicles for relatively short distances and they usually
connect places that are not easily accessible by road.
Adjusts the different sound volumes and changes the voice guidance profile.
[Ferries]
Set to off to avoid prioritising ferries for calculating the
route.
[Car Shuttle Trains]*
Set to off to avoid prioritising car shuttle trains for
calculating the route.
[Carpool Lanes]
Set to off to avoid prioritising carpool and HOV lanes for
calculating the route.
[Unsealed Roads]
Set to off to avoid prioritising unpaved roads for
calculating the route.
[4WD Tracks]
Set to off to avoid prioritising rough roads such as dirt
roads with bad surface conditions.
[Sound]
Menu Item
Description
[Voice]
Adjust the volume of the guidance sounds (verbal
instructions).
[Alert Beeps]
Adjust the volume of the non-verbal alert sounds (beeps).
[Ding]
Adjust the volume of the sound (ding) that precedes the
verbal instructions.
[Voice Guidance]
Enable or disable voice guidance.
[Announce Streets and
Roads in Native Language
Area]*
Select whether to have the navigation system announce
the street names in the native language of the area, only
the road numbers, or only the manoeuvres.
[Announce Streets and
Roads in Foreign
Language Area]*
Select whether to have the navigation system read the
street names in a foreign country, only the road numbers,
or only the manoeuvres.
[Early Indication of
Manouevres]
Select whether you want an immediate announcement for
the next manoeuvre or to receive the information when
the manoeuvre is near.
[Verbosity Level]
Set the verbosity of the voice instructions.
(How much information is given and how often the
prompts occur.)
[Minimal]
Given once right before the next manoeuvre.
[Medium]
Given once as the vehicle approaches the next manoeuvre
and it is repeated right before the manoeuvre.
Menu Item
Description
* Enabled only when a TTS-voice is selected for the voice language.
Enables or disables warnings and sets up the warning function.
Important
•
This system is able to warn you if you exceed the current speed limit. This information may not be
available for your region (ask your local dealer), or may not be fully correct for all roads on the map.
•
You are liable for ensuring that using this feature is legal in the country where you intend to use it.
[Verbose]
Given once relatively far from the next manoeuvre, it is
repeated as the vehicle approaches the next manoeuvre,
and it is repeated again right before the actual manoeuvre.
[Announce Route
Summary]*
Select whether to have the navigation system announce by
voice a quick summary of the route whenever a route is
calculated.
[Announce Country Info]*
Select whether to read out information about the country
you have just entered when crossing country borders.
NOTE
This function is not effective if the map coverage of your
navigation system is only one country (technically, there is no
country border data).
[Announce Traffic Info]*
Select whether to have the navigation system announce by
voice the traffic information whenever a traffic incident on
your route is received.
[Announce System
Messages]*
Select whether to read out the message when a system
message appears.
[Warnings]
Menu Item
Description
[Speed Warning]
Set the type of speed and alert warnings.
[Warn When Speeding] Select whether to receive visible and/or audible warnings.
[Disabled]
No warnings will go off.
[Visual]
Visible warnings will go off when exceeding the speed
limit.
[Audio and Visual] Audible and visible warnings will go off when exceeding
the speed limit.
[Speed Limit Always
Visible]
Select whether to see the speed limit sign on the map all
the time. The colour of the speed limit sign changes as
exceeding the speed limit when selected.
Menu Item
Description
