Pioneer AVIC-Z710DAB Скачать руководство пользователя

Страница: 78 / 92

A black screen is displayed.

→

While operating an application, the
application was ended on the
smartphone side.
– Press

to display the top menu

screen.

→

The smartphone OS may be awaiting
screen operation.
– Stop the vehicle in a safe place and

check the screen on the smartphone.

The screen is displayed, but operation
does not work at all.

→

An error has occurred.
– Park your vehicle in a safe place, and

then turn off the ignition switch (ACC
OFF). Subsequently, turn the ignition
switch to on (ACC ON) again.

– When an Android device is connected,

disconnect the Bluetooth connection
from this product and then reconnect
it.

The smartphone was not charged.

→

Charging stopped because the
temperature of the smartphone rose
due to prolonged use of the
smartphone during charging.
– Disconnect the smartphone from the

cable, and wait until the smartphone
cools down.

→

More battery power was consumed
than was gained from charging.
– This problem may be resolved by

stopping any unnecessary services on
the smartphone.

The status of the vehicle for the forwards
and backwards directions are reversed.

→

Since part of the vehicle status is sent to
the connected device when you use the
Android Auto function, this problem

occurs when the reverse gear polarity
setting of this product is incorrect.
– Check the polarity and re-select the

correct setting.

When problems occur with this product, an
error message appears on the display.
Refer to the table below to identify the
problem, then take the suggested
corrective action. If the error persists,
record the error message and contact your
dealer or your nearest Pioneer service
centre.

AMP Error

→

This product fails to operate or the
speaker connection is incorrect; the
protective circuit is activated.
– Check the speaker connection. If the

message fails to disappear even after
the engine is switched off/on, contact
your dealer or an authorised Pioneer
Service Station for assistance.

TEMP

→

The temperature of this product is
outside the normal operating range.
– Wait until this product returns to a

temperature within the normal
operating limits.

Product overheat, For protection the
System will shut down automatically in 1
minute. Re-cycle the ignition to restart
the product If this message keeps
showing, please contact your dealer or
local service centre

→

The temperature is too high for this
product to operate.
– Follow the instructions displayed on

the screen. If this does not solve the

Problems with Application
screen

Error messages

Common

problem, contact your dealer or an
authorised Pioneer Station for
assistance.

Positioning is not possible due to
hardware error. Please consult your
dealer or local authorised service centre.

→

The location display is not possible due
to hardware failure.
– Contact your dealer or an authorised

Pioneer Station for assistance.

No GPS antenna. Check connection.

→

GPS reception is lost.
– Check the aerial connection. If the

message fails to disappear even after
the engine is switched off/on, contact
your dealer or an authorised Pioneer
Station for assistance.

GPS antenna problem detected. Contact
dealer or service center.

→

GPS aerial lead is short-circuited.
– Contact your dealer or an authorised

Pioneer Station for assistance.

Calibration will start, but may be
inaccurate without speed pulse.

→

The speed pulse sensor is not
connected correctly.
– Contact your dealer or an authorised

Pioneer Station for assistance.

Sensor error. Please contact your dealer
or Pioneer Service Center.

→

An error has occurred with the sensor.
– Contact your dealer or an authorised

Pioneer Station for assistance.

Detected unusual speed pulses.

→

The speed pulse cannot be detected
correctly.
– Contact your dealer or an authorised

Pioneer Station for assistance.

Detected changes in the installation
angle or position. The in-dash receiver is
updating the sensor learning data.

→

Changes in the installation angle or
position are detected.
– Wait until the sensor learning finishes.

Speed pulse wire is not connected. The
system will operate in simple hybrid
mode.

→

Speed pulse wire is not connected.
– The speed pulse cannot be detected if

the speed pulse wire is not connected
correctly.

Check Antenna

→

The aerial connection is incorrect or an
unusual voltage has been detected.
– Turn the ignition switch OFF and

connect the aerial correctly. After
connecting, turn back ON again.

Error-02-XX/FF-FF

→

The disc is dirty.
– Clean the disc.

→

The disc is scratched.
– Replace the disc.

→

The disc is loaded upside down.
– Check that the disc is loaded correctly.

→

There is an electrical or mechanical
error.
– Press the RESET button.

Different Region Disc

→

The disc does not have the same region
number as this product.
– Replace the DVD with one bearing the

correct region number.

DAB tuner

Disc

Содержание AVIC-Z710DAB




























































































Результаты поиска

Содержание AVIC-Z710DAB

Отзывы:

Похожие инструкции для AVIC-Z710DAB

Бренды по названию

Популярные бренды

Pioneer AVIC-Z710DAB, Руководство по эксплуатации

Результаты поиска

Содержание AVIC-Z710DAB

Отзывы:

Похожие инструкции для AVIC-Z710DAB

Бренды по названию

Популярные бренды