Introduction of setup
adjustments
1
1
Setup menu display
Shows the setup function names.
%
Press A.MENU button and touch SETUP
to display the setup function names.
The setup function names are displayed and
operable ones are highlighted.
#
To return to the previous display, touch
BACK
.
#
To return to the display of each source, touch
ESC
.
Note
If you do not operate the setup function within
about 30 seconds, the display is automatically re-
turned to the source display.
Setting the AV input
You can switch the setting according to the
connected component.
!
Select
VIDEO
to watch video of a con-
nected component as
AV
source.
!
Select
M-DVD
to watch video of a con-
nected DVD player as
S-DVD
source.
!
Select
EXT-V
to watch video of a connected
video unit as
EXT
source.
%
Touch AV IN on the setup menu to se-
lect the AV input setting.
Touch
AV IN
until the desired setting appears
in the display.
!
OFF
No video component is connected
!
VIDEO
External video component (such
as portable video player)
!
M-DVD
Multi-DVD player connected with
RCA cable
!
EXT-V
External video unit (such as Pio-
neer products available in the future)
#
When a multi-DVD player is connected with
an AV-BUS cable, do not select
M-DVD
otherwise
no picture will be displayed even if you select
S-DVD
.
Setting for rear view camera
CAUTION
Pioneer recommends the use of a camera
which outputs mirror reversed images, other-
wise screen image may appear reversed.
This unit features a function that automatically
switches to the rear view camera video (
REAR
VIEW CAMERA IN
jack) when a rear view
camera is installed on your vehicle. When the
gear shift is in
REVERSE (R)
position, the
video automatically switches to a rear view
camera video. (For more details, consult your
dealer.)
!
Confirm the setting immediately whether
the display changes to a rear view camera
video when the gear shift is moved to
RE-
VERSE (R)
from another position.
!
When the display changes to a rear view
camera video during normal drivings,
switch to another setting.
!
To return to the source display, press
V.ADJ
.
1 Touch B-CAM on the setup menu.
Other Functions
En
88
Section
18