%
Touch D. WARN on the initial menu to
turn warning tone on.
#
To turn warning tone off, touch
D. WARN
again.
Switching the auxiliary setting
It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
using auxiliary equipment connected to this
unit.
%
Touch AUX on the initial menu to turn
auxiliary setting on.
#
To turn auxiliary setting off, touch
AUX
again.
Setting the illumination
switch
You can choose whether to have the illumina-
tion of this unit switch on/off when the ignition
key is turned to the ACC position or the power-
off position.
!
When the AVG-VDP1 is connected to this
unit, you cannot operate this function.
%
Touch ILM SW on the initial menu to
turn the illumination switch on.
Set the illumination switch ON to have the illu-
mination of this unit remain on when the igni-
tion key is turned to the ACC position. Set to
OFF to have the illumination off when the igni-
tion key is turned to the ACC position.
#
To turn the illumination switch off, touch
ILM SW
again.
Note
Never set the illumination switch on if the vehicle
does not have the ACC position. It may cause bat-
tery leakage.
Setting the rear output and
subwoofer controller
This unit
s rear output (rear speaker leads out-
put) can be used for full-range speaker (
FULL
)
or subwoofer (
SUB. W
) connection. If you
switch the rear output setting to the
SUB. W
,
you can connect a rear speaker lead directly to
a subwoofer without using an auxiliary amp.
Initially, the unit is set for rear full-range speak-
er connection (
FULL
). When rear output is
connected to full range speakers (when
FULL
is selected), you can connect the RCA sub-
woofer output to a subwoofer. In this case, you
can select whether to use the subwoofer con-
troller
s (low pass filter, phase) built-in
SUB.W
or the auxiliary
FULL
.
!
When the multi-channel processor (e.g.,
DEQ-P7650/DEQ-P6600) is connected to
this unit, you cannot operate this function.
1 Touch NEXT on the initial menu.
2 Touch REARSP.
3 Touch
a
or
b
to switch the rear output
setting.
Touch
a
to select full-range speaker and
FULL
appears in the display. Touch
b
to select sub-
woofer and
SUB. W
appears in the display.
#
When no subwoofer is connected to the rear
output, select
FULL
.
#
When a subwoofer is connected to the rear
output, set for subwoofer
SUB. W
.
#
When the rear output setting is
SUB. W
, you
cannot change the subwoofer controller.
Initial Settings
En
85
Section
17
Initial
Settings