Note
Selecting a cross-over frequency is to set a cross-
over frequency of the subwoofer
s L.P.F. (low-pass
filter) and that of the
SMALL
speaker H.P.F. (high-
pass filter). The cross-over frequency setting has
no effect if the subwoofer is set to
OFF
and other
speakers are set to
LARGE
or
OFF
.
Adjusting the speaker
output levels
You can readjust the speaker output levels
using a test tone while listening to music.
1 Touch NEXT on the DSP function menu.
2 Touch SP LEVEL.
3 Touch
a
or
b
to select the speaker to
be adjusted.
Each time you touch
a
or
b
selects the speak-
er in the following order:
FRONT-L
(front speaker left)
CENTER
(center
speaker)
FRONT-R
(front speaker right)
REAR-R
(rear speaker right)
REAR-L
(rear
speaker left)
SUB WOOFER
(subwoofer)
#
You cannot select speakers whose size is set
at
OFF
.
4 Touch
c
or
d
to adjust the speaker out-
put level.
Each time you touch
c
or
d
increases or de-
creases the speaker output level.
+10
10
is
displayed as the level is increased or de-
creased.
Note
To adjust the speaker output levels in this mode is
the same as making the speaker output levels at
TEST TONE
. Both provide the same results.
Digital Signal Processor
En
73
Section
15
Digital
Signal
Processor