Adjusting the Music mode
You can adjust the Music mode with the fol-
lowing three controls.
!
Panorama (
PANORAMA
) extends the front
stereo image to include the surround
speakers for an exciting
wraparound
ef-
fect.
!
Dimension (
DIMENSION
) allows you to
gradually adjust the sound field either to-
wards the front or the rear.
!
Center Width Control (
CENTER WDT
) al-
lows center-channel sounds to be posi-
tioned between the center speaker and the
left/right speakers. It improves the left-cen-
ter-right stage presentation for both the dri-
ver and the front passenger.
1 Touch NEXT on the DSP function menu.
2 Touch DOLBY PL II.
3 Touch MUSIC and then touch ADJUST.
#
You can operate
ADJUST
only when
MUSIC
has been selected.
4 Touch
a
or
b
to select PANORAMA (pa-
norama).
Each time you touch
a
or
b
selects the item
in the following order:
PANORAMA
(panorama)
DIMENSION
(di-
mension)
CENTER WDT
(center width)
5 Touch
c
to turn the panorama control
on.
#
To turn the panorama control off, touch
d
.
6 Touch
b
and then touch
c
or
d
to ad-
just front/surround speaker balance.
Each time you touch
c
or
d
it moves the
sound towards the front or the surrounds.
+3
3
is displayed as the front/surround
speaker balance moves from front to sur-
rounds.
7 Touch
b
and then touch
c
or
d
to ad-
just the center image.
Each time you touch
c
or
d
it gradually
spreads the center channel sound into the
front left and right speakers over a range
0
7
.
3
is the default and it
s recommended for
most recordings.
0
places all center sound in
the center speaker.
7
places all center sound
equally in the left/right speakers.
Setting the speaker setting
You need to make with/without (or yes/no) and
size (bass reproducing capacity) selection/ad-
justments depending on the installed speak-
ers. The size needs to be set to
LARGE
(large)
if the speaker is capable of reproducing
sounds of about 100 Hz or below. Otherwise
select
SMALL
(small).
!
Low frequency range is not output if the
subwoofer is set to
OFF
and the front and
rear speakers set to
SMALL
or
OFF
.
!
It is imperative that non-installed speakers
be set to
OFF
.
!
Set the front or rear speaker to
LARGE
if
the speaker is capable of reproducing bass
content, or if no subwoofer is installed.
1 Touch NEXT on the DSP function menu.
2 Touch SP SET.
3 Touch
a
or
b
to select the speaker to
be adjusted.
Each time you touch
a
or
b
selects the speak-
er in the following order:
FRONT
(front speakers)
CENTER
(center
speaker)
REAR
(rear speakers)
SUB WOOFER
(subwoofer)
PHASE
(sub-
woofer setting)
#
You can switch to
PHASE
only when the sub-
woofer has been set to
ON
.
Digital Signal Processor
En
71
Section
15
Digital
Signal
Processor
