!
When the automatic playback function is
on, this unit will cancel the DVD menu and
automatically start playback from the first
chapter of the first title. Refer to
Automatic
playback of DVDs
on page 32.
#
To eject a disc, press
EJECT
.
Notes
!
The DVD player plays one, standard, 12-cm or
8-cm (single) disc at a time. Do not use an
adapter when playing 8-cm discs.
!
Do not insert anything other than a disc into
the disc loading slot. Discs which can be
played back are listed on
Playable discs
on
page 7.
!
If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press
EJECT
to eject the disc, and check the
disc for damage before inserting it again.
!
If an error message such as
ERROR-02
is dis-
played, refer to
Error messages
on page 95.
!
If bookmark function is on, DVD playback re-
sumes from the selected point. For more de-
tails, refer to
Resume playback (Bookmark)
on
page 33.
Adjusting the volume
%
Use VOLUME to adjust the sound level.
With the head unit, press
VOLUME
up/+ or
down/
to increase or decrease the source vo-
lume.
With the remote control, press
VOLUME
to in-
crease or decrease the volume.
Turning the unit off
%
When using the touch panel keys,
touch the source icon and then touch OFF.
#
When the source icon is not displayed, you
can display it by touching the screen.
%
When using the buttons, press SOURCE
and hold until the unit turns off.
Using the rear display
You can watch a DVD/Video CD/TV/AV on the
rear display.
1 Press A.MENU button and touch SETUP
to display the setup function names.
2 Touch R.DISP on the setup menu to dis-
play video of the selected source on rear
display.
Touch
R.DISP
until
SOURCE
appears in the
display.
!
SOURCE
Display the video of the selected
source on rear display
!
V.D.P.
Display the AVG-VDP1 on rear dis-
play
Note
When a Pioneer Vehicle Dynamics Processor
(AVG-VDP1) is connected to this unit, the AVG-
VDP1 can be displayed on the rear display. (Refer
to page 90.)
Displaying the AVG-VDP1
(Pioneer Vehicle Dynamics
Processor)
This unit can be used as the display unit for
the AVG-VDP1 (sold separately) product.
Basic Operations
En
18
Section
04