Using the sound field control
The SFC function creates the sensation of a
live performance.
!
The acoustics of different performance en-
vironments are not the same and depend
on the extent and contour of space through
which sound waves move and on how
sounds bounce off the stage, walls, floors
and ceilings. At a live performance you
hear music in three stages: direct sound,
early reflections, and late reflections, or re-
verberations. Those factors are programed
into the SFC circuitry to recreate the acous-
tics of various performance settings.
1 Press EQ button and hold to switch to
SFC function.
Press
EQ
and hold until
SFC
appears in the
display.
#
To switch to equalizer function, press
EQ
and
hold again.
2 Press EQ to select the desired SFC
mode.
Press
EQ
repeatedly to switch between the fol-
lowing mode:
MUSICAL
(musical)
DRAMA
(drama)
ACTION
(action)
JAZZ
(jazz)
HALL
(hall)
CLUB
(club)
OFF
(off)
Note
If the source is a 2-channel LPCM audio or a 2-
channel Dolby Digital audio and you select SFC
effects that are most applicable for 5.1-channel
audio (i.e.,
MUSICAL
,
DRAMA
or
ACTION
), we
recommend turning Dolby Pro Logic II on. On the
other hand, when selecting SFC effects that are
intended for use with 2-channel audio (i.e.,
JAZZ
,
HALL
or
CLUB
), we recommend turning Dolby
Pro Logic II off.
Using the position selector
One way to assure a more natural sound is to
accurately position the stereo image, putting
you right in the center of the sound field. The
position selector function lets you automati-
cally adjust the speaker output levels and in-
serts a delay time to match the number and
position of occupied seats. When used in con-
junction with the SFC, the feature will make
the sound image more natural and offer a pa-
noramic sound that envelops you.
1 Touch POSITION (POSI) on the DSP func-
tion menu.
2 Touch
c
/
d
/
a
/
b
to select a listening po-
sition.
Touch one of these,
c
/
d
/
a
/
b
, to select a lis-
tening position as listed in the table.
Key
Display
Position
c
FRONT-L
Front seat left
d
FRONT-R
Front seat right
a
FRONT
Front seats
b
ALL
All seats
#
To cancel the selected listening position,
touch the same key again.
Note
When you make adjustments for listening posi-
tion, the speakers are automatically set for appro-
priate output levels. You can tailor them if you
want as discussed under the heading of
Adjust-
ing the speaker output levels using a test tone
or
Adjusting the speaker output levels
.
Digital Signal Processor
En
68
Section
15
