Pioneer AVH-P5750DVD, Руководство по эксплуатации

Страница: 62 / 109

Introduction of audio
adjustments
1
1 Audio display
Shows the audio function names.
Important
If the multi-channel processor (DEQ-P7650/DEQ-
P6600) is connected to this unit, the audio func-
tion will be changed to the multi-channel proces-
sor
s audio menu. For details, refer to
Introduction of DSP adjustments on page 67.
1 Press A.MENU button to display MENU.
MENU appears on the display.
# You can also display MENU by clicking the
joystick on the remote control.
2 Touch AUDIO to display the audio func-
tion names.
The audio function names are displayed and
operable ones are highlighted.
# To go to the next group of function names,
touch NEXT .
# To return to the previous group of function
names, touch PREV .
# If EQ-EX function has been selected and only
when EQ-EX is turned on and CUSTOM is se-
lected as the equalizer curve, you can switch to
BASS and TREBLE .
# Only when the subwoofer controller setting is
FULL , NON FADING will be displayed instead of
SUB WOOFER . (Refer to Setting the rear output
and subwoofer controller on page 85.)
# When selecting the FM tuner as the source,
you cannot switch to SLA .
# To return to the previous display, touch BACK .
# To return to the display of each source, touch
ESC .
Note
If you do not operate the audio function within
about 30 seconds, the display is automatically re-
turned to the source display.
Using balance adjustment
You can select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
1 Touch FAD/BAL on the audio function
menu.
# When the rear output setting is SUB. W , BAL
will be displayed instead of FAD/BAL . Refer to
Setting the rear output and subwoofer controller
on page 85.
2 Touch a or b to adjust front/rear
speaker balance.
Each time you touch a or b it moves the
front/rear speaker balance towards the front or
the rear.
FRONT:15 REAR:15 is displayed as the front/
rear speaker balance moves from front to rear.
# FR:00 is the proper setting when only two
speakers are used.
# When the rear output setting is SUB. W , you
cannot adjust front/rear speaker balance. Refer to
Setting the rear output and subwoofer controller
on page 85.
Audio Adjustments
En
62
Section
14