HUNTER-PRO 896 Installation Guide
75
If the system does not receive any command for a period of 60 seconds, it shall
disconnect and return to normal mode. The system will remain in standby (displaying
“Other keypad in use” on all the keypads) for another 60 seconds, before returning to
normal mode.
6.1.1
Example for arming the system via telephone:
Dial the system’s phone no.
the system answers
wait for confirmation tone to
end
enter Main code
wait for command confirmation tone to end
6.2 Mode
B
Repeat steps 1-4 in previous section to establish communication with the system.
To activate an output:
& the corresponding command from the following
tables.
To deactivate an output:
& the corresponding command from the following
tables.
System
PCB
Outputs
OUT-1000
* 01 Arm
11 External Siren
21
Output no. 1
# 01 Disarm
12
Internal Siren
22
Output no. 2
* 04 Arm to ‘Home 1’
13
Relay
23
Output no. 3
* 07 Arm to ‘Home 2’
14
SMOKE detector
24
Output no. 4
* 08 Listen-in
15
ON/OFF
25
Output no. 5
* 00 Telephone
16 ALARM
26
Output no. 6
17
Audio Ctrl
27
Output no. 7
28 Output
no.
8
I/O-8N Expanders
31
Expander no. 1
37
Expander no. 7
32
Expander no. 2
38
Expander no. 8
33
Expander no. 3
39
Expander no. 9
34
Expander no. 4
40
Expander no. 10
35
Expander no. 5
41
Expander no. 11
36
Expander no. 6
