72
HUNTER-PRO 896 Installation Guide
5.12.6 Test
MS
Dialer
0
ENTR
ENTR
BACK
X4
Tests
ENTER/NEXT/END
Test MS Dialer
ENTER/NEXT/END
Test MS Dialer
Select T. No. 1-4
Test the Monitoring Station’s PSTN numbers. Pressing
will dial the MS phone #1,
pressing
will do so for phone #2, and so on.
Note
: The MS PSTN and radio test screens have a feature to help you overcome
missing information/installation: if, while trying to perform a test, a data is missing, like
a phone number or a protocol, an error message is displayed asking you to press
.
After pressing the key, the required menu will automatically be displayed.
For example:
Set Ph. Connect!
Press END
. This error message occurs when trying to test the
MS radio without programming the account number first. Pressing
transfers the
menu to
Commun. Options
ENTER/NEXT/END
screen in “Communication” menu.
5.12.7 Test
MS
GSM
0
ENTR
ENTR
BACK
X3
Tests
ENTER/NEXT/END
Test MS GSM
ENTER/NEXT/END
Test MS GSM
Select T. No. 1-4
Test the MS GSM phone numbers. Refer to previous section for instructions. If the
GSM-200 receiver is not installed, an error message appears
Set GSM Install.
Press END
5.12.8 Test
MS
Radio
0
ENTR
ENTR
BACK
X2
Tests
ENTER/NEXT/END
Test MS Radio
ENTER/NEXT/END
Please Wait..
Test the long range radio transmitter, TRV/TRU-100. Pressing
will send a
transmission event test to the MS. No ACK from the MS should be received in this test.
See previous note in case radio related data is missing in the system.
