HUNTER-PRO 896 Installation Guide
71
Set a zone to be soaked (tested). When a zone/detector is suspected of causing false
alarms, it can be configured to be in a test mode. A test can last up to 7 days (to set
the number of soak days, refer to section
5.5.6)
All events from a tested zone will neither trigger the alarm, nor be reported to MS.
However, they will be registered in the memory log.
When the programmed time for the soak test is over, the zone will automatically return
to normal operation.
To turn a zone from soak to normal mode,
in the zone number screen.
5.12.5 Outputs
Test
0
ENTR
ENTR
NEXT
Tests
ENTER/NEXT/END
Outputs Test
ENTER/NEXT/END
X4
ENTR
Outputs Test
External Siren
Exit=END
This feature lets you to test directly every output connected to the system - local and
remote. Pressing
triggers the output for 10 seconds. Pressing
ends the test.
Testing the outputs has a great advantage - it allows the installer to define between
connection problems and programming faults: if a device does not work properly but is
triggered by the output test, than the problem lays with programming (or the device
itself) and not connection.
On the other hand, failing to trigger the external siren (for example) through the
output test, indicates a connection or other-than-programming problem.
These are the outputs test screens by their order:
Output
Key Presses
Details
External Siren
Onboard output
Internal Siren
Onboard output
Relay
X2
Onboard output
Smoke Output
X3
Onboard output
On/OFF Output
X4
Onboard output
ALARM Output
X5
Onboard output
Audio Contrl
Out
X4
Onboard output
OUT-1000
Outputs
X3
to trigger one of
OUT-1000 8 outputs
Exp IO-R
Outputs
X2
to trigger one of
I/O-R 32 outputs
Exp IO-8
Outputs
to trigger one of the
I/O-8’s cards
